Care and Use Guide

water bottle 64 oz

Care and Use Guide

Assembling Spout Lid

1. Remove lid (A) by twisting it counterclockwise, replace the lid (A) by twisting it clockwise.

2. Twist off the locking-cap (B) to open.

3. Push the spout cap (B) to handle (C) to lock the cap (B).

4. When finishing drinking, flip over the cap (B) and twist to close and lock.

5. Pull the handle (C) to take the bottle anywhere.

a. Ensure gaskets (A1 and B1) are properly seated to prevent leaking.

b. Fill container with beverage. Do not overfill. Leave space for lid (A) to avoid overflow.

Using the Bottle

Before first use, wash all parts with warm, soap water. Rinse thoroughly and allow to dry.

Liquids should not be left in the container for longer than 24 hours. After each use, wash all parts with warm, soap water right away. Then rinse thoroughly with clean water. Allow to dry completely prior to next use or storage.

Do not use bleach or detergents containing chlorine on any parts of the product.

Hand Wash Only - This product is not dishwasher safe .

Do not immerse or soak in water for prolonged periods of time.

Hand washing is recommended to ensure that all parts of the product are thoroughly cleaned.

Warnings

  • Do not use the product in microwave, on stove top, or in any type of oven.
  • Be careful when filled with hot liquids. Hot liquids may burn or scald user.
  • Always test temperature of contents before consuming.
  • Do not overfill the container. Leave space at top of container to avoid overflow.
  • Check the gasket periodically to ensure it is not worn or misaligned as this may cause leakage.
  • Contents should not be left in container for longer than 24 hours.
  • Do not use the container to hold or store carbonated drinks or dry ice.
  • Do not use tools or devices to open the container.